What is K11 waterproof coating and K11 waterproof

2022-07-22
  • Detail

K11 waterproof coating is a two-component polymer molecular modified polymer waterproof system. Although this K11 waterproof coating is a special waterproof coating, it is also widely used, especially for indoor and outdoor concrete structures, floor walls, floors, basements and other places. Next, we will introduce the construction process of K11 waterproof coating and K11 waterproof coating

The K11 waterproof coating is a two-component polymer molecular modified polymer waterproof system. Although this K11 waterproof coating is a special waterproof coating, it is also widely used, especially for indoor and outdoor concrete structures, floor walls, floors, basements and other places. Next, we will introduce the construction process of K11 waterproof coating and K11 waterproof coating

what is K11 waterproof coating

the active ingredients in K11 waterproof coating will penetrate into the pores of the cement-based surface, and then a chemical reaction will occur. In addition, it will also soak into the bottom of the material, crystallize inside the material, and form a waterproof layer. K11 waterproof coating is applied on the wet surface, and the subsequent process can be carried out directly without mortar protective layer

k11 waterproof coating construction process

1. Level and clean the ground, make arc corners for internal and external corners, grind sharp places flat, and keep the roughness of the base surface of the wall pasted with tiles. If the wall is too smooth, roughen it

2. Wet the ground with water. For corners, through wall pipes, construction joints and other places, waterproof paint and glass fiber cloth can be used to strengthen the treatment, with a thickness of 1.0mm

3. For the waterproof layer, it is necessary to water and wet the surface to maintain a certain humidity, and then brush the mixed waterproof coating directly on the base surface according to the proportion, and press it for several times. The first layer is not sticky, and then brush the second layer directly. Generally, the waterproof layer needs to be brushed more than two layers. When the last waterproof layer is not dry, it is thinly sprinkled with medium sand on it, which can enhance the bonding force with the protective layer or ceramic tile bonding layer

4. After the waterproof layer is dry, 1.5 ~ 2.0cm thick cement mortar protective layer or ceramic tile and other finishing layers can be made as required

k11 waterproof coating characteristics

1. The active ingredients in K11 waterproof coating will penetrate into the pores of the cement base surface and penetrate into the internal crystallization of the substrate to form a waterproof layer

2. It can cover cracks and resist slight shocks

3. It can be constructed on the wet base surface without mortar protective layer. Just paste tiles directly

4. K11 waterproof coating has high impermeability and compressive strength, and has the waterproof function of negative water surface

5, non-toxic, harmless, and the coating also has the effect of depressive mold growth, which can prevent moisture and salt from polluting the finish

editor's summary: This is the introduction of what is K11 waterproof coating and the construction process of K11 waterproof coating. I hope it will be helpful to you. If you want to know more relevant knowledge, you can pay attention to information

成都风湿医院

西安心理医院

佛山男科医院

济南男科医院

Copyright © 2011 JIN SHI